Skip to content
Cimentart Hard, solvent based varnishes available from MyMicrocement
Cimentart Hard, solvent based varnish (for up to 50m2) available from MyMicrocement
Cimentart Hard, solvent based varnish (for up to 10m2) available from MyMicrocement

Hard, Solvent based Varnish

The CIMENTART HARD Bi-COMPONENT POLYURETHANE is a solvent-based, colourless waterproof coating, based on reticent resins with isocyanates, with excellent hardness, chemical resistance and high resistance to yellowing.

It can be applied both outdoors and indoors, has a high resistance to washing and weathering, indicated in a special way to be applied in microcement coatings with high traffic.

With the application of HARD Bi-COMPONENT POLYURETHANE CIMENTART, you get:

  • Protection of Microcement coatings.
  • Enhanced aesthetic finish.
  • Increased abrasion resistance.

Available in 3 finishes – gloss, satin and matte.

HSBV
SKU HSBV Category
Clear

  • Varnish Finish *

Product total

Options total

Grand total

Description

USE INSTRUCTIONS


Before application of CIMENTART HARD Bi-COMPONENT POLYURETHANE, apply 2 coats of CIMENTART SEALER. Mix the 2 components, by mechanical means, until obtaining a perfect homogenous mixture, in the following proportions: 2 parts of Polyurethane (Component A) for 1 part of Hardener (Component B). Apply a layer, in an orderly manner and without extending too much or stretching the product, ensuring that there is no area left uncovered, without puddles, creating a layer about the thickness of a sheet of paper. Apply very well drainage areas or joints where water can penetrate. Apply a second layer in the same way. In areas that may receive large amounts of water or moisture, it is recommended to apply 3 coats. The final drying time before use must be at least 72 hours. The minimum waiting time before you can receive water is 5 days. The product is supplied ready to use. It should not be diluted, so as not to alter properties of hardness and impermeability. Apply with a brush, microfiber roller or airless, on the surface clean of dust. It is recommended to go over the surface with the roller, to remove air bubbles, especially in very hot, dry or highly ventilated environments. The tools and work tools are cleaned with universal solvent.


EFFICIENCY

With 1 liter of HARD Bi-COMPONENT POLYURETHANE CIMENTART can be applied approximately from 8 to 10 m2. We recommend 2 layers on surfaces without contact with water and 3 layers on surfaces in contact with the water (outdoor terraces, showers, bathroom countertops, etc.)


PACKAGING

The CIMENTART Bi-COMPONENT POLYURETHANE for all types of finishing: Glossy, Satin or Matte
Is available in 3 different recipients:

  • Metal containers 1.5 Kg: 1 Kg Component A + 0.5 Kg Component B.
  • Metal containers 6 Kg: 4 Kg Component A + 2 Kg Component B.
  • Metal containers 30 Kg: 20 Kg Component A + 10 Kg Component B.


STORING

12 months, in a dry place protected from bad weather in its original recipient hermetically closed.

* Drying time depends on temperature, ventilation and humidity in the room.